Ripple Heat
 |
|
Ripple Heat |
RippleHeat patient warming system There are a number of ways to warm patients during perioperative care or in intensive care. Hawksley’s water systems are probably the most effective on offer, giving distinct and clear advantages over air, gel and electric systems.
|
|
|
||
Features |
||
| Patient temperature control RippleHeat | The Hawksley RippleHeat can be simply programmed to the desired temperature between ambient and 40 deg centigrade and microprocessor control will ensure the set temperature is maintained during use. | |
| Alternating pressure cycle | Both the the RippleHeat and the RippleCool 6/40 are unique in providing a ripple cycle within the mattress which aids prevention of pressure sore development for immobile or unconscious patients. In OT or ICU.or Recovery room the cells of the mattress alternate in pressure every six minutes thus changing pressure points continuously. | |
| Precise temperature control | High Efficiency heat exchange system with rapid flow through the mattress ensures accurate temperatures ± 0.5şC across the entire mattress surface. | |
| Alarm/status display | Constant monitoring of the temperature and flow systems to check for error with indicators to show the status of the instrument and any fault conditions. Visual and audible alarms alert the user to high temperature and, in the case of RippleCool, low temperature as well. | |
| Quick couplings | Leak free polypropylene quick couplings connect the mattress to the instrument. Self-sealing valves on the mattress and the instrument allows disconnection with no water loss and the warm blanket can remain under the patient in transit. | |
| High-quality mattress |
Durable double-laminated PVC mattress with dual cells for lternating pressure. The mattress use sanitised material which is extra thick to avoid tears and permit extended use and is guaranteed for 12 months. Six sizes of mattress are available to suit operating table and hospital beds for Infant, Child or Adult patients. |
|
| Low-profile design | The RippleHeat instrument is compact and designed to be mounted on a standard trolley with ancillary equipment. | |
| Splashproof controls | Smooth surface membrane controls with tactile switches give an easily cleanable splashproof areas. | |
| Filling and drainage | Filling the unit with water is monitored by a convenient sight guage and a tank water level sensor. Low water level is identified by sensors and a visual/audible alarm will alert the operator. Drainage of the system is carried out by a simple self sealing valve at the base of the unit and cannot be accidentally turned on or off. | |
| Safety in use | The Hawksley RippleHeat and RippleCool are built in compliance with BS5724 and IEC 601. Visual and audible alarms alert the operator to patient and instrument fault conditions and the alarm system can be tested from the control panel or paused during use. | |
| Serviceability | Use of modern materials and design techniques permit easy servicing and microprocessor self-diagnostics assist in amy fault finding. All parts are guaranteed for 12 months and routine maintenance is simple and low cost. | |
Technical specifications |
||
| Classification | Class 1 equipment | |
| Shock protection | Type B | |
| Degree of mobility | Mobile equipment | |
| Ingress of liquids | Ordinary | |
| Mode of operation | Continuous | |
| Power consumption | 750 watts at 220/240v 50Hz ac | |
| Heater | 650 watt @ 240v ac | |
| Temperature range | 20° - 40°C (± 0.1°C accuracy) | |
| 63°F - 104°F (±I°F accuracy) | ||
| Heating time | Ambient to 40°C in 24 - 28 mins | |
| Tank capacity | 3.5 litres | |
| Pump | Centrifugal single ended magnetic drive | |
| Flow rate | Rippling - 46 litres per hour - Non-rippling - 82 litres | |
| Mattress pressure | Rippling 0.35kg cm2 - Non-rippling 0.30kg cm2 | |
| Ripple cycle | 6 minutes | |
| Overall dimensions | 450mm W x 350mm D x 180mm H | |
| Weight | 11.63kg (empty) | |
| Anaesthetic proof | Mattress onlv | |
Prices and ordering